Mitsubishi Electric GOT2000 GT27 · HMI Panel

Mitsubishi GT2712-STBD

Order number 270555

ECS rates the GT2712-STBD as phase-out: still orderable, but on its way out. This is the time to plan, not panic.

  1. ActiveSold and supported normally
  2. Phase OutRetirement announced, still orderable
  3. CancellationNormal sale ended, spares may remain
  4. Total DiscontinuationNo manufacturer supply or repair

ECS stage: Phase Out. Mitsubishi Electric's published term: Selling Status: Standard.

Is the Mitsubishi Electric GT2712-STBD being discontinued?

On ECS's lifecycle assessment, the GT2712-STBD is in phase-out: still orderable for now, but on its way out. Its successor is the GT3712-WXCBD-030.

Source: ECS lifecycle assessment, based on ECS's internal lifecycle data in Command Centre. Last checked . Always confirm a specific part's status with the manufacturer before buying or planning a migration.

What Phase Out means for you

The manufacturer is retiring the part, but you can still buy it. Nothing needs ripping out. Four things are worth doing while it is still easy: find every unit you run, make sure each has a current backup, decide whether to hold spares, and price the move to the GT3712-WXCBD-030.

How ECS defines Phase Out · all four lifecycle stages

Before replacing an HMI

With an HMI, the editable application is at least as important as the screen itself. We would secure the source project, record the engineering-software version, PLC communications, recipes or retained data, and measure the panel cut-out.

Conversion utilities can speed up a migration, but older drivers, scripts, alarms and fonts do not always transfer cleanly. A spare display only protects production if the correct application can be restored to it.

ECS engineering guidance

GT2712-STBD part details

Manufacturer
Mitsubishi Electric
Range
GOT2000 GT27
Name
GOT2000 GT27 Advanced 12.1-inch DC SVGA touchscreen HMI
Summary
12.1-inch TFT GOT2000 operator panel with 800×600 SVGA resolution, 65,536 colors, 24 V DC power, RS-232, RS-422/485, USB, Ethernet, SD card slot, and black housing. Mitsubishi Electric lists GT3712-WXCBD-030 as the successor; no specific discontinuation date for this exact material number was found.
Successor
GT3712-WXCBD-030
Programming software
GT Designer 3
Software versions
Held in Command Centre, matched to firmware
Programming cable
Held in Command Centre

Common questions about the GT2712-STBD

Is the Mitsubishi Electric GT2712-STBD being discontinued?

On ECS's lifecycle assessment, the GT2712-STBD is in phase-out: still orderable for now, but on its way out. Its successor is the GT3712-WXCBD-030.

What replaced the GT2712-STBD?

Mitsubishi Electric lists the GT3712-WXCBD-030 as the successor. Check compatibility with your machine before planning the change.

Can I still buy a GT2712-STBD?

Yes, through normal channels during the phase-out period. It is the cheapest point to buy any spares you want to hold.

How do I back up a GT2712-STBD?

It is programmed with GT Designer 3. The exact software version and cable depend on the unit's firmware. ECS records both for every unit it captures, alongside a verified backup.

An ECS engineer capturing a control panel on a tablet: PLC, drive and power supply identified and synced to Command Centre

With a backup, a failed unit is hours. Without one, it is days.

A Capture audit finds every GT2712-STBD on your site, takes a backup of each one it can reach, and records the software version and cable needed to restore it. When a discontinued unit fails and a replacement turns up, the program is ready to load.

  • Every device located, photographed and lifecycle-checked
  • Backups taken on the day, with software version and cable recorded
  • Findings report, plus a populated Command Centre
  • No production downtime
See how Capture works

Related parts

All Mitsubishi Electric parts · All manufacturers